At one of the websites on urushi it was referred to as "organic plastic"...
I believe Monty (the most revered sir) uses some kind of plastic in his Tei
Hei flutes... what is that material that he is using for his cast bore
flutes... I can say that his flutes are amongst the easiest to play of any
flute I've picked up...
I still wonder about using a varnish or shellac and coloring it with the
powdered sumac like I and the Arabs eat... it's a dark reddish brown
color... can one use an organic compound like this to give color to the
varnish?
Brett Breitwieser ( zen@arizuma.us <mailto:zen@arizuma.us> )
Arizuma Zen
http://arizuma.us
"The clouds evaporate in the cold sky.
The autumn has departed and the mountain is barren.
This is where we originally dwell." -Hongzhi
-----Original Message-----
From: Mark Millonas [mailto:millonas@email.arc.nasa.gov]
Sent: Thursday, November 20, 2003 4:39 PM
To: Shakuhachi@communication.ucsd.edu
Subject: RE: urushi
>
>Mark,
>Not to rub it in Gene's face...but, what is the imitation urushi you
>refer to here?
Naw, I don't think gene needs anything more rubbed in his face
right now, if you know what you mean....
this rib poking reminds me:
a colleague of mine from Sweden once used poison oak to wipe himself the
first
time he went backpacking in New Mexico - he ended up in the hospital, but
I think the humiliation was almost as bad as the pain....but I digress...
---------------------------------
tinted shellac faux-urushi
1. Go to your local hardware store and buy some shellac - clear
or amber may not make a difference in this case, but I used clear.
Shellac is non-toxic, and even smells "nice". (however I'm just guessing
that if you are a recovering alcoholic you might want to avoid this smell)
You can "tint" shellac, and if you go to the paint mixing counter they can
tell you the maximum about of
tint you can add to the shellac. This is much less than, say, the percent
of color you can add to paint, but I digress.
2. Go to their color charts and select
the color you would like, dark red, bright red, black, florescent green,
etc.
3. The tell them you want to add that color to the shellac to the maximum
recommended concentration.
They will usually have to mix two or more pigments to get that color, and
they have a computer program
that they use to figure things out. Its exactly the same process as mixing
paint, except you use shellac.
At this point you can either make sure your pigments are non-toxic, or if
you are at all worried
pick up another can of plain shellac to use as a last coat or two.
4. The final result will look something like paint in the can. *Be sure
to shake or stir well before applications*. I like to
use a squirt bottle and it apply a la Monte Levenson's recommendations in
his booklet, but
you may have your own favorite method. The shellac is very fluid so the
"pour down the rotating bore" method works perfectly.
5. The shellac will dry in 15 minutes, but it's probably best to wait an
hour or two between coats. I sand with 200 grade
paper between the first few coats, and then switch to an even finer grade
as a hard shiny, opaque finish
is achieved. If your trying to actually fill in some contours you might
want to be more aggressive initially.
The first few coats will not look watery, but after 3-4 coats it will be
shiny, solid red (or whatever)
like the color you chose. After about 10 coats, depending on how obsessive
you are, you will have a beautiful
hard, shiny, glass-like (and tough) bore finish. I guessing if you are
going for a less finished, less lacquered
look you could just apply a few coats.
You can get a quart of this stuff for less than $10, you don't have to
search the world over, you don't
need to know the secret password so the cryptic little old lady behind the
counter can slip you some on the sly,
and you don't have to go into toxic shock. Also, you can use the
instrument a few hours after you apply the last coat.
Its not urushi, its *nothing special*.
There are of course variations and substitutions you make on this. The
advantages of this one are that it is cheap, non-toxic, quick drying, and
you can
find the basic ingredients anywhere.
cheers,
marko
_____________________________________________
List subscription information is at:
http://communication.ucsd.edu/shaku/listsub.html
_____________________________________________
List subscription information is at:
http://communication.ucsd.edu/shaku/listsub.html
This archive was generated by hypermail 2b29 : Tue Jan 06 2004 - 14:09:36 PST